Oilfield-equipment-sales-rentals-2

OILFIELD EQUIPMENT SALES AND RENTALS

Advanced Lines has a significant role in providing support to the Oil and Gas Industry by supplying various equipment as follows to our esteemed Clients.

CENTRIFUGAL PUMP

Centrifugal Pumps area sub-class of dynamic axisymmetric work- absorbing turbo-machinery. Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from where it exits.

FILTRATION UNIT

Our Dual Vessel Cartridge Unit (TDW) is the most commonly used filer cartridge unit in the Oilfield industry. This, offshore proof, skid-mounted filter unit can be supplied as a cartridge, bag or combination unit, equipped with all necessary valves and safety features. Our Dual Vessel Cartridge Unit offers the most cost-effective way to clean-up all possible oilfield fluids. It allows you to simultaneously filter with once vessel and easily change

BATCH MIXER

Engine: Caterpillar C9 300 bhp Diesel Engine or Equivalent
Tanks: 2 x 70 BBL Mild Steel Tanks usable volume of 60-65 BBL per tank.
Coating: Derekane Coating for Anti Acid applications up to 32% HCL for Tanks
Agitators: One (1) Each Agitator in each Tank
C Pump: Two (2) C Pumps of Size – 4 x 5 x 11
Controls: Mounted in a Control Panel with Air Strut supported with closing lid.
Valves: Acid Resistant PTFE Butterfly Valves

CEMENT BULKER

The trailer-mounted cement transporter is built according to ASME section VIII Division 1 and is capable of handling bulk material. The banana-shaped cement transport trailer hauls 1,060 ft3 (30 cubic meters) volume in two equal compartments and is designed to perform at a maximum working pressure of 40 psi. The interior is designed to allow dry material to flow out under airstream pressure to the surge tank or the field silo. Two manways are located on the top of the tank for performing maintenance operations and for top loading of sand.

FRAC TANK TRAILERS

The Frac Tank Trailer is a 500 BBL single-compartment unit suitable for use with HCL up to a concentration of 32%. Designed for use in all land-based operations, the Frac Tank Trailer (500 BBL Acid) features a manifold which allows the series connection of multiple units, providing the flexibility to meet low and high fluid storage demands.
The tank incorporates a Tnemec lining specifically formulated for high acid resistance and longevity. Further, should the lining suffer any physical damage, repairs are relatively simple. Built as a self-contained trailer unit, the tank can be transported and placed on site easily without the requirement for any specialist lifting equipment.

ABOVE GROUND STORAGE TANK (AGST)

Capacity: 5,000 bbl. to 80,000 bbl.
Capable to operate in Extreme Conditions
Textile Membrane
Water Holding Membrane
Operating Temperature: up to +70°C
Warranty of 10 Years to Manufacturing Defects

ACID STORAGE TANK

Capacity: 5000 USG Skid Mounted
Circulating Line: 1 X 4” Fig 207 Union
Discharge Line: 1 X 4” Fig 207 Union
Lining: Derekane 470-300
Single Compartment, Double Valve (4”) At Discharge Line, Complete Handrails On Top.

ISO CRYOGENIC TANKS

The ISO-PACK 2000 6bar is a vacuum insulated liquid gas transportable / storage tank, designed to transport liquid Nitrogen by road, rail and sea. The tank dimensions meet the requirements of DNV, IMO and CSC.
The ISO-PACK is used primarily for offshore operations and OHS customers include all major well service companies. In addition to European and International approvals, the ISO-PACK 2000 (6bar) also has US DOT approval which permits the use of the tank in North America.

ACID TRANSPORTER

Capacity: 8000 USG Trailer Mounted
Construction: A36 Material With Shell Thickness Of 6mm
Fill Line: One (1) X 4” Line With 1 Each Acid Resistant Butterfly Valve.
Drain Line: One (1) X 4“ Drain Line From Each Compartment With 1 Each Acid Resistant Butterfly Valve.
PRV: Each Compartment Has A Clay And Bailey Manway W/ PRV
Lining: Derekane 470-300 Lining
Tyres: 11R 22.5 R187 Sumitomo With Disc Rims
Brakes: Spring Brakes On 2 Axles
Landing Leg: JOST A400
Compartment: Three (3) Compartments
Manhole: One (1) Each Per Compartment On Top Of The Tank

NITROGEN TRANSPORTER

Capacity: 7000 USG Trailer Mounted
Design Code: EN13530-2 (ADR/TPED Certification Excluded)
Design Pressure: 4 Barg
Design Temp.: -196 Deg C / +37 Deg C
Internal Material: 1.4301 / 1.4307 Stainless Steel
Outer Material: S355J2+N Carbon Steel
Transfer Pump: Cryostar GBS 155 Centrifugal Transfer Pump
Tyres: Bridgestone / Good Year
Brake System: EBS WABCO
Axles: BPW Or SAF Pneumatical Axles

FRAC PUMP

A frac pump is a high-pressure, high-volume pump used in hydraulic fracturing treatments. Hydraulic fracturing is a well stimulation technique where fracking liquid (a mixture of mostly water and sand) is injected into rock formations at high-pressures, allowing for the extraction of natural oil and gas. Frac pumps have evolved throughout history to accommodate the increasing demand of pressure pumping services companies around the world as operators are required to push drilling into more complex geological formations to ensure supply.

TWIN PUMP

Skid mounted twin pumping unit
Skid: L x W x H : 8.4m x 2.6m x 3.0m
Deck engine: 2 x Detroit Diesel8v-71 305bhp.
Transmission: Allison CLBT-754
Control panel data acquisition equipment, recording system.
Triplex pump: 2 x Gardner Denver PG (3 3/4″ 10,000psi and 4.5″ 5,000psi).
Centrifugal pump: 2 x Garden Denver 5″x4″.
Fluid and air tank: hydraulic, diesel and air tanks.
Displacement tank: One 20BBL divided into 2 compartments
High and low pressure piping.

CARGO BASKETS

OEG Offshore is a leading provider of specialist Offshore Cargo Carrying Units and A60 Cabins. OEG provides an extensive range of Equipment on Rental basis from worldwide locations.

NITROGEN PUMP

The product range includes Nitrogen Pump/Converter units with flow rates up to 180K scf/hr and pressures up to 15,000psi. All pumps are certified as a minimum to DNV 2.7-1 and Zone II, with ATEX and NORSOK certification options also available.
This nitrogen pump unit outputs up to 180k scf/hr of nitrogen gas at temperatures of 20 deg C (70 deg F). Units can be provided rated to 10,000psi (690 bar) or 14,500psi (1000 bar) with a PED approved vaporizer pot.

SINGLE TRIPLEX PUMP

Triplex pumps are positive displacement type pumps used to move both thin and viscous fluids with a triple mechanism all driven by a single power source.

RIG CAMP UNIT

Advanced Lines Est. with its local Manufacturing Facility for Customized Portacabin’s offers various sized Offices, Sleepers etc. fulfilling Aramco requirements with Quality, Safety and Comfort.
These Portacabin’s are supplied to major Aramco Service Companies in the Kingdom supporting their various operations in the Rig and Well Sites. Our Portacabins are fully customizable for various purposes to fulfil Client’s requirement.

40ft. Cabin, Eight (8) Men Sleeper with Two (2) attached WC.
40ft. Cabin, Customized Meeting Room Facility.
20ft. Cabin, Mosque Facility.
40ft. WC Facility.
Custom Sized Security Cabin.
Custom Sized Spooling Cabin.

PORTABLE LIGHT

The professional grade L8WKUB-60HZ- T4F light tower provides the superior lighting your worksite requires. The L8 is dependably rugged, featuring durable protective reflector housings with tempered glass. These light towers feature reliable engines and a larger, brighter coverage area. If your event or workday doesn’t start until the sun goes down, the L8.

Make Kubota D1105
Emissions Tier Level Tier 4 Final (T4F)
Number of Cylinders/Displacement – cu In (L)3/69 (1.1)
Power @ Rated Speed – bhp (kW) @ 1800 rpm13.6 (10.1)
Cooling System Water DC System
Voltage/Battery Capacity12 V/600 CCA
Fuel Type/Useable Fuel Capacity – gal (L) Diesel/27 (102)
Runtime with 4 lights – hr52

DIESEL GENERATOR

Generator Type : Open Type
Power Rating : 200 KVA, 160 KW
Engine Model No. : P086TI
Voltage : 380/220 V
Power Factor : 0.8
Ambient Temp. : 50 ° C
Alternator Brand : MARELLI
Speed Governor Type : Mechanical Type (Standard)

Power Application : Prime Power
Engine Brand : DOOSAN
Number of Cylinder : 6 Cylinder – Line type
Total output Amps. : 303 Amps
Frequency : 60HZ, 1800 RPM
Insulation Class : Class H
Alternator Model No. : MJB250LA4
Controller : Unit Mounted DSE 7110.

DIESEL GENERATOR SOUNDPROOF

Generator Type : Soundproof Type
Power Application : Prime Power
Power Rating : 200 KVA, 160 KW
Engine Brand : DOOSAN
Engine Model No. : P086TI
Number of Cylinder : 6 Cylinder – Line type
Voltage : 380/220 V
Total output Amps. : 303 Amps.

Power Factor : 0.8
Frequency : 60HZ, 1800 RPM
Ambient Temp. : 50 ° C
Insulation Class : Class H
Alternator Brand : MARELLI
Alternator Model No. : MJB250LA4
Speed Governor Type : Mechanical Type (Standard)
Controller : Unit Mounted DSE 7110

AIR COMPRESSOR

Compressor (Low Pressure & High Pressure)
Free-Air Delivery – cfm (m³/min)450 (12.7)400 (11.3)
Rated operating Pressure – psig (bar)150 (10.3) 200 (13.8)
Pressure range – psig (bar)80 – 175 (5.5 – 12.1)80 225 (5.5 –15.5)
Air Discharge outlet size – in (mm)1.25 (31.75) 1.25 (31.75)
Air Discharge outlet Quantity11
Fuel Tank Capacity – gal (L)63 (227)63 (227)
DEF Tank Capacity – gal (L)5 (19)5 (19)
Hours of operation @ Full Load8,58,3

DIESEL TANK

Advanced Lines Group manufactured a diesel tank with a capacity of 1500 Liters. The dimension of the diesel tank is 1250 x 1250 x 1950 mm.

CHEMICAL INJECTION PUMP – DHDA66

Air-operated, high-flow, double-acting hydraulic pumps for pressure testing, chemical injection, and hydraulic power. Features:

Infinitely variable output pressure and flow
Holds static pressure without generating heat or consuming power.
Standard models are suitable for oil or water applications
Well proven and trouble free operation
Designed for ease of maintenance
Low cost servicing ase of maintenance
Robust construction

SHALE BIN (7/10 meters)

Shale Bins are made of heavy-duty industrial steel, it is used on drilling rig sites to collect drill cuttings. High, low, and four-sided bins are designed to hold all types of solid waste or drill cuttings generated on project sites. Features & Advantages:

WELL TEST PUMP UNIt

Specifications:

Low pressure pump, displacement/cycle: 260ml
Low pressure pump ratio: 12:1
Low pressure pump maximum pressure:1000 psi
High pressure pump ratio: 100:1
High pressure pump, displacement/cycle: 13.4ml
High pressure pump maximum pressure:10,000 psi
Recommended pump air requirement:75 cfm
Maximum air supply pressure:1 40 psi
Minimum air supply pressure: 90 psi10k
System relief valve set:10,400 psi
1k system relief valve set:1,300 psi