Centrifugal Pumps area sub-class of dynamic axisymmetric work- absorbing turbo-machinery. Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor. The fluid enters the pump impeller along or near to the rotating axis and is accelerated by the impeller, flowing radially outward into a diffuser or volute chamber (casing), from where it exits.

Our Dual Vessel Cartridge Unit (TDW) is the most commonly used filer cartridge unit in the Oilfield industry. This, offshore proof, skid-mounted filter unit can be supplied as a cartridge, bag or combination unit, equipped with all necessary valves and safety features. Our Dual Vessel Cartridge Unit offers the most cost-effective way to clean-up all possible oilfield fluids. It allows you to simultaneously filter with once vessel and easily change.

The trailer-mounted cement transporter is built according to ASME section VIII Division 1 and is capable of handling bulk material.

The banana-shaped cement transport trailer hauls 1,060 ft3 (30 cubic meters) volume in two equal compartments and is designed to perform at a maximum working pressure of 40 psi.

The interior is designed to allow dry material to flow out under airstream pressure to the surge tank or the field silo. Two manways are located on the top of the tank for performing maintenance operations and for top loading of sand.

The Frac Tank Trailer is a 500 BBL single-compartment unit suitable for use with HCL up to a concentration of 32%. Designed for use in all land-based operations, the Frac Tank Trailer (500 BBL Acid) features a manifold which allows the series connection of multiple units, providing the flexibility++++y to meet low and high fluid storage demands.

The tank incorporates a Tnemec lining specifically formulated for high acid resistance and longevity. Further, should the lining suffer any physical damage, repairs are relatively simple. Built as a self-contained trailer unit, the tank can be transported and placed on site easily without the requirement for any specialist lifting equipment.

• Capacity: 15,000 bbl. to 80,000 bbl.
• Capable to operate in Extreme Conditions
• Geo-Textile Membrane
• Valmex 7616 Waterproofing Membrane
• Operating Temperature: upto +70°C
• Warranty of 10 Years to Manufacturing Defects

Capacity: 5000 USG Skid Mounted

Circulating line: 1 x 4” Fig 207 Union

Discharge Line: 1 x 4” Fig 207 Union

Lining: Derekane 470-300

Single Compartment, Double Valve (4”) at Discharge Line, Complete Handrails on top.

The ISO-PACK 2000 6bar is a vacuum insulated liquid gas transportable / storage tank, designed to transport liquid Nitrogen by road, rail and sea. The tank dimensions meet the requirements of DNV, IMO and CSC.

The ISO-PACK is used primarily for offshore operations and OHS customers include all major well service  companies. In addition to European and International approvals, the ISO-PACK 2000 (6bar) also has US DOT approval which permits the use of the tank in North America.

Capacity: 8000 USG Trailer Mounted

Construction: A36 Material with Shell Thickness of 6mm

Fill Line: One (1) x 4” Line with 1 each Acid Resistant

Butterfly Valve.

Drain Line: One (1) x 4“ Drain Line from each Compartment

with 1 each Acid Resistant Butterfly Valve.

PRV: Each Compartment has a Clay and Bailey manway w/ PRV

Lining: Derekane 470-300 Lining

Tyres: 11R 22.5 R187 Sumitomo with Disc Rims

Brakes: Spring Brakes on 2 Axles

Landing Leg: JOST A400

Compartment: Three (3) Compartments

Manhole: One (1) each per Compartment

On top of the tank

Capacity: 7000 USG Trailer Mounted

Design Code: EN13530-2 (ADR/TPED Certification excluded)

Design Pressure: 4 barg

Design Temp.: -196 deg C / +37 deg C

Internal Material: 1.4301 / 1.4307 Stainless Steel

Outer Material: S355J2+N Carbon Steel

Transfer Pump: Cryostar GBS 155 Centrifugal

Transfer Pump

Tyres: Bridgestone / Good Year

Brake System: EBS WABCO

Axles: BPW or SAF Pneumatical Axles

A frac pump is a high-pressure, high-volume pump used in hydraulic fracturing treatments. Hydraulic fracturing is a well stimulation technique where fracking liquid (a mixture of mostly water and sand) is injected into rock formations at high-pressures, allowing for the extraction of natural oil and gas. Frac pumps have evolved throughout history to accommodate the increasing demand of pressure pumping services companies around the world as operators are required to push drilling into more complex geological formations to ensure supply.

Skid mounted twin pumping unit

Skid: L x W x H : 8.4m x 2.6m x 3.0m

Deck engine: 2 x Detroit Diesel8v-71 305bhp.

Transmission: Allison CLBT-754

Control panel data acquisition equipment, recording system.

Triplex pump: 2 x Gardner Denver PG (3 3/4″ 10,000psi and

4.5″ 5,000psi).

Centrifugal pump: 2 x Garden Denver 5″x4″.

Fluid and air tank: hydraulic, diesel and air tanks.

Displacement tank: One 20BBL divided into 2 compartments

High and low pressure piping.

OEG Offshore is a leading provider of specialist Offshore Cargo Carrying Units and A60 Cabins. OEG provides an extensive range of Equipment on Rental basis from worldwide locations.

PRODUCTS:

1. Half Height Containers        7. Waste Skips
2. Mud Cutting Skips                8. Wireline Baskets
3. Mini Containers                     9. A60 Cabins
4. Cargo Baskets                       10. Workshop Containers
5. Tool Baskets                          11. Waste Compactors
6. Dry Goods Containers          12. Offshore Chemical Tanks

The product range includes Nitrogen Pump/Converter units with flow rates up to 180K scf/hr and pressures up to 15,000psi. All pumps are certified as a minimum to DNV 2.7-1 and Zone II, with ATEX and NORSOK certification options also available.

This nitrogen pump unit outputs up to 180k scf/hr of nitrogen gas at temperatures of 20 deg C (70 deg F). Units can be provided rated to 10,000psi (690 bar) or 14,500psi (1000 bar) with a PED approved vaporizer pot.

The professional grade L8WKUB-60HZ- T4F light tower provides the superior lighting your worksite requires. The L8 is dependably rugged, featuring durable protective reflector housings with tempered glass. These light towers feature reliable engines and a larger, brighter coverage area. If your event or workday doesn’t start until the sun goes down, the L8.

Make Kubota D1105

Emissions Tier Level Tier 4 Final (T4F)

Number of Cylinders/Displacement –

cu In (L)3/69 (1.1)

Power @ Rated Speed – bhp (kW)

@ 1800 rpm13.6 (10.1)

Cooling System Water DC System

Voltage/Battery Capacity12

V/600 CCA

Fuel Type/Useable Fuel Capacity

– gal (L) Diesel/27 (102)

Runtime with 4 lights – hr52